|The finished dresser|
You don't need a fancy workshop for this project - the entire thing was done on the balcony of my apartment with things I already had, or picked up from Home Depot. Safety first, though - remember to protect your mouth and eyes from sawdust and paint fumes. Oh, and don't hammer your thumb, either.
|The dresser: before|
Step 1: Peel off yucky gold velvet lining from the inside of the drawers. Throw velvet in the trash and hope never to see it again.
Step 2: Remove hardware from drawer fronts. A flat screwdriver worked well for me, but feel free to use a crowbar if they're not cooperating.
Step 3: Sand old paint off. (In retrospect, I would have just spraypainted right over top of it to save time - and arm muscle.) Wipe off sawdust for a clean painting surface.
Step 4: Spray paint surfaces with white glossy spray paint, to give it a smooth coating. Let dry. (I know it's hard, but be patient and let it dry.)
Step 5: Spray paint over with matte black spray paint. Let dry. My paint crackled as it dried to reveal the white paint beneath, which I actually like. If you don't want this look, you'll have to ask somebody else because I don't know how this happened!
Step 6: Spray paint hardware. If you want to spray paint the nails, push them half-way in to a piece of styrofoam or corrugated cardboard to told them upright.
Step 7: Re-attach hardware to drawer fronts.
Some "before" shots:
|The inside of the drawers, rid of their YUCKY velvet!|
|Before shot of the detail on the top.|
|The dresser without its drawers - oh my!|
|Back of the old dresser|
Some "after" shots:
|The beautiful carved edges.|
|A beautiful pattern that looks like it's stamped into the wood, but could be carved.|
|A close-up of the entirely unintentional (but delightful) "crackle-effect"|
The original dresser had 2 drawer pulls the large drawers, but was missing a couple of them, so I moved the large drawer pulls to the center, so that I only needed one per drawer. One nail was missing, so I found a similarly-sized screw in my glasses repair it!
|Showing the replacement screw.|